Unvented Hot Water Systems Salford

Unvented Hot Water Systems Salford

Currently there are three main types of hot water systems in use in the UK; open vented, unvented and  instantaneous. Learn about the many benefits of unvented hot water systems installed by Gaswise Plumbing & Heating below.

 

UNVENTED HOT WATER SYSTEMS SALFORDThe principle contrast between high pressure unvented hot water systems Salford and a standard low pressure vented system is that we don’t need the cold water storage cistern, open vent pipe or cold feed pipe.

Rather, the unvented system is fed direct with the mains cold water supply with an inlet control group preset to the relevant manufacturers stipulated pressures. Warm water drawn from the unit is then replenished from your mains supply.

As water expands when hot and (as the title implies) there isn’t a vent pipe, the expanded water in the system is accommodated by either an exterior expansion vessel or, in the event of bubble-top units, an interior air bubble in the unit which is generated when the system is commissioned.

To maximise the main advantages of unvented hot water systems Salford, a sealed heating system, if applicable, will also be put in so long as the boiler employed is compatible.

The sizeable benefits to be gained from the installation of an unvented hot water storage system may be broken into two classes: benefits to the specifier/installer and benefits to the homeowner.

 

 

  • Reliability & timekeeping 100%
  • Tidiness 100%
  • Courtesy 100%
  • Workmanship 100%
  • Charged as per quote 100%
unvented hot water systems salford

Benefits of Unvented Hot Water Systems Salford

Specifier / Installer Benefits for unvented hot water systems Salford

Choice of location – unit could be fitted almost anywhere in the building structure, enabling improved flexibility of house and system design and lowering costs.
Excellent performance – helps ensure continual high flow rates at all outlets and allows for fast filling up of bathtubs.
No cold water storage cistern – will reduce pipework. No requirement of tank stand or pipework/tank insulation – reduces costs. Roof space can be utilised for additional living accommodation.
Balanced pressures – far wider range of taps and showers can be utilised.
Quicker to install – lowers pipework and unit installation costs.
Cuts down noise in system – no filling of cold water storage cistern.
Smaller diameter pipework may be used – cuts down costs.
Gets rid of potential for freezing and broken water lines in roofing space.
No shower pump required – will reduce costs.
Removes risk of contamination – no cold water storage cistern in roof space.
Superior overall performance and flow rates, well suited for multi-bathroom properties.
Energy-efficient – will reduce energy costs.
Ease of maintenance – no access to roof space needed.
Frees roof space – could be utilised for loft conversions.
Aesthetic looks.

 

Gaswise Plumbing & Heating ( Gas Engineer Salford)

Specialists in unvented hot water systems Salford.

53 Cleggs Lane
Little Hulton
Salford
M38 9WU

07913 346686
james@gaswise.org.uk

Contact Us